BS-10
Fixed top support
40-0200-002
*Suitable for doors that are placed in a frame..
*Due to the vertically adjustable pin, a minimum space between door and frame is possible. .
*The top pivot is fitted with needle bearings that allow the door to rotate smoothly. .
*Very easy to install.
BS-10 What are the characteristics?
- Minimum installation dimension in the door or frame, only 18 mm deep.
- BS-10 the pin can be turned out to 25 mm.
- Fixed upper pivot with needle bearings.
4. For interior and exterior doors up to a weight of 200kg.
5. Easy assembly.
6. Stainless steel
Downloads
Documentation
Download documentation
Technical drawing
Download documentation
Installation manual
Download documentation
BS-15
Adjustable top support
40-0200-005
*Suitable for doors that are placed in a frame..
*Due to the vertically adjustable pin, a minimum space between door and frame is possible. .
*The top pivot is fitted with needle bearings that allow the door to rotate smoothly. .
*Very easy to install.
BS-15 What are the characteristics?
- Minimum installation dimension in the door or frame, only 18 mm deep.
- BS-15 the pin can be turned out to 25 mm.
- The top pivot is equipped with needle bearings and is horizontally adjustable 20 mm
4. For interior and exterior doors up to a weight of 200kg.
5. Easy assembly.
6. Stainless steel
Downloads
Documentation
Download documentation
Technical drawing
Download documentation
Installation manual
Download documentation
BS-20
Fixed top support
40-0200-024
* Suitable for doors mounted directly under a ceiling.
* Due to the minimal installation of the pivot (only 20 mm), very narrow profiles can be used.
* Suitable for narrow profiles
* The pivot is fitted with needle bearings, which gives the pivot an extra-long life.
BS-20 What are the characteristics?
- Mounting directly under the ceiling.
- Fixed upper pivot with needle bearings.
- Minimum drilling depth of 20 mm.
4. Accurate Assembly
5. Easy Assembly
6. Stainless steel
Downloads
Documentation
Download documentation
Technical drawing
Download documentation
Installation manual
Download documentation
BS-55
Centre set
40-0200-071
– Kit voor de PSI.
– PSI montage midden van de deur.
– Geschikt voor smalle profielen.
– De bovenspeun is voorzien van naaldlagers waardoor de deur soepel draait.
– Geschikt voor deuren die direct onder een plafond worden gemonteerd.
BS-55. Wat zijn de kenmerken?
- Montage in het midden van de deur mogelijk.
- Minimale inbouwmaat in de deur of kozijn, slechts 20 mm diep.
- Fixed upper pivot with needle bearings.
4. Voor binnendeuren tot een gewicht van 200 kg.
5. Easy Assembly
6. Stainless steel and black colour
Downloads
Documentation
Technical drawing
Installation manual
Download documentation
BS-25
Adjustable top pivot
40-0200-062
* Suitable for doors mounted directly under a ceiling.
* Due to the minimal installation of the pivot (only 18 mm) very narrow profiles can be used
* The upper pivot is equipped with needle bearings for an extra-long life.
* The pivot is horizontally adjustable by 2 cm
BS-25 What are the characteristics?
- Minimum installation dimension in the door: only 20 mm.
- The BS-25 is horizontally adjustable by 2 cm.
- Adjustable upper pivot with needle bearings
4. For interior doors up to a weight of 200 kg
5. Easy Assembly
6. Stainless steel / steel
Downloads
Documentation
Technical drawing
Installation manual
Download documentation
BS-30
Adjustable top pivot
40-0200-064
* Suitable for doors that are mounted directly under a ceiling or in a frame.
* The BS-30 can be adjusted both horizontally and vertically.
* After mounting, the door can be adjusted horizontally by 2 cm on both the left and right.
* The pin can be turned out 20 mm.
* The BS-30 can be used for all types of doors and frames.
BS-30 What are the characteristics?
- Stainless steel appearance
- The BS-30 is adjustable both horizontally and vertically.
- Plain bearing technology.
4. For interior doors up to a weight of 200 kg
5. Easy Assembly
6. Stainless steel
Downloads
Documentation
Technical drawing
Installation manual
Download documentation
VP-20
Design floor plate
40-0200-065
- This design floor plate exudes beauty and strength.
- Due to its unique properties, this floor plate is suitable for all types of floors.
- Drilling tile-deep is sufficient, so that the risk of damage to the floor heating is virtually nil.
- Due to the special M fix glue, the floor plate can be worked on after 30 minutes; after this the plate is extreme stuck.
Vp-20 What are the characteristics?
- Stainless steel design and execution
- Tile-deep mounting only
- Suitable for floor heating
4. 3mm adjustable
5. Easy Assembly
6. Stainless steel and black colour
Downloads
Documentation
Technical drawing
Installation manual
Download documentation
VP-30
Mini design floor plate
40-0200-066
- This design floor plate exudes beauty and strength.
- Due to its unique properties, this floor plate is suitable for all types of floors.
- Drilling tile-deep is sufficient, so that the risk of damage to the floor heating is virtually nil.
- Its size makes it ideal for use with two adjacent floors.
VP-30 What are the characteristics?
- Stainless steel design and execution
- Tile-deep mounting only
- Suitable for floor heating
4. 3mm adjustable
5. Easy Assembly
6. Stainless steel and black colour
Downloads
Documentation
Technical drawing
Installation manual
Download documentation
VP-10
Basic floor plate
40-0200-018
- The basic floor plate is fixed with 4 screws and plugs.
- Drilling depth 40 mm
- After mounting the floor plate, the plates are clicked on and the attachment is invisible.
VP-10 What are the characteristics?
- Stainless steel click cover plates
- Basic version
- No chopping in the floor
4. 3mm adjustable
5. Easy Assembly
6. Stainless steel and black colour
Downloads
Documentation
Technical drawing
Installation manual
Download documentation
ADITIONAL ACCESSORIES
M-Fix® glue set
40-0200-032
- M-Fix 2-component adhesive has been specially developed for heavy wear and tear and a fast-drying time.
- The use of these adhesives performs rapid assembly
- Ensures safe and durable attachment of the floor plates.
- Available with special glue guns and mixing nozzles
What are the characteristics?
- Two component glue
- Short curing time
- Applicable on multiple surfaces
4. For indoor and outdoor use
5. Easy Assembly
6. To be used with glue gun
ADITIONAL ACCESSORIES
Drilling template
40-0200-071
40-0200-072
- Drilling templates ensure that the correct dimensions are secured.
- The chance of mis drilling is small
- For mounting on both floor and ceiling.
- Durable aluminum material for long lasting use.
What are the characteristics?
- Precise Assembly
- Fast Assembly time
- Always the right positions of holes
4. Ceiling mold
5. Floor mold
6. Aluminum material
ADITIONAL ACCESSORIES
Z-profiel
40-0200-061
– Geschikt voor de PSI-100 en PSI-150
– Met dit hulp stuk is het mogelijk om de taatdeurscharnieren
– In het midden te monteren in plaats van aan de kopse kant
VP-10 What are the characteristics?
- RVS
- Off centre montage
ADITIONAL ACCESSORIES
PSI-100 Blackline set
40-0200-071
- Suitable for the PSI-100 and PSI-150
- The accessories are black so that they stay in line with the black doors.
- All visible parts are finished in black
What are the characteristics?
- Black floor plate
- Black heel plate
- BS-02 in black
Downloads
Documentation
Technical drawing
Download documentation
Installation manual
Download documentation
PSI-100
PSI-150
PSU-500
PSG-100
PSG-150
English (UK) 
Nederlands 
Français 
Deutsch (Sie)